Check Valve: Reliable Backflow Prevention Solution

Check Valve
Check Valve Supplier
Check Valve Manufacturers in India
Lightbox
Check Valve
Check Valve Supplier
Check Valve Manufacturers in India

Check Valve: Reliable Backflow Prevention Solution

Previous product
Reflux Valve Manufacturer
Reflux Valve
Next product
Ball Valve Manufacturer
Ball Valve: Versatile and Reliable Flow Control Solution

In Stock

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Check Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Product Enquiry
Description

High-Efficiency Dual Plate Check Valve for Industrial Fluid Control

A Check Valve is an essential device used in fluid control where it allows for the movement of fluids in one direction and then blocks it in another. Thus, a valve is fundamental to water treatment plants, chemical industries and hydraulic systems. This pilot-operated check valve has stood out because of its dependability as well as additional control features that make it fit for installation on complex hydraulic circuits demanding high-accuracy flow regulation.

Material Specifications:

They are built using various materials, including stainless steel, PVC, and cast iron, tailored to suit specific environmental and operational conditions. The PVC Check Valve is ideal for applications with low pressure and chemicals due to its lightweight and corrosion-resistance properties. The material selection is based on the lifecycle of the product and the necessity for environmental compliance.

Technical Specifications:

The sizes of these Check Valves range from 1/2 inches to 48 inches so as to suit the various pipeline sizes. The pressure rating can be as high as 600 PSI, while the temperature tolerances are between -10°C and 200°C. Types that may be found include [Wafer Check Valve], [Dual Plate Check Valve], and [Ball Check Valve], among others, depending on which is most appropriate for a specific utility in different operational contexts. Particularly, the reason why many people like it is its space-saving design.

Standards and Compliance

Every check valve is manufactured in conformance with ASTM, ISO 9001, and API. As one of the leading [check valve manufacturers] in India, we ensure that our products have been subjected to stringent testing procedures in regard to these standards, providing assurance to our clients regarding their safety, reliability, and performance. As a [Check Valve Supplier], it is also certified for adherence to quality management and excellence in customer service.

Usage Instructions

Routine preventive maintenance practices, including normal inspection and cleaning, will ensure the best performance of your Check Valve and a long lifetime. The proper installation of the check valve, as provided by [check valve manufacturers in India], does away with the most common problems of mispositioning and preserves good functional qualities. For troubleshooting and more detailed maintenance information, refer to the user manual or contact our technical support team.

Applications

The check valve, being one of the valves implemented with a one-way flow, is quite important. In applications like [Check Valve for Water Pump], this valve is highly implemented to avert backflow, which might end up impairing the pump. The hydraulic check valve type is of major importance within the hydraulic system as it is used for holding steady pressure and averting backflow of liquid under conditions of variable pressure.

Features and Benefits

Features:

  • High pressures and rugged conditions can be withstood due to its rugged construction.
  • Quick design ensures minimum flow of backwater.
  • It is available in various types, for example, [dual plate check valves] and [pneumatic check valves].

Benefits:

  • Ensures safety of the system and increases operational safety.
  • This helps lower maintenance costs by preventing fluid contamination and reducing component wear.
  • The prices are very competitive, really giving a good solution for the customer’s valve requirement with robust, reliable solutions.

Related Products

To complement your Check Valve installation, consider integrating:

  • [Pressure Relief Valves]: Overpressure protection is a must.
  • [Control Valves]: These valves have great precision over the flow and pressure within the system.
  • [Strainers]: The latter can be placed inside so as to screen debris and prevent clogging of the check valve.

Support and Warranty Information

You can manage your plan, such as Our check valves, including the [Wafer Check Valve] and [PVC Check Valve], come with a full warranty and complete backup from our customer service. We can help with issues on installation, operation, and troubleshooting in order to make your valve perform perfectly during its service life.

Specializations
Disc:Bronze / PVC (IS 15225) / Cast Carbon Steel / SS (ASTM A182 F6a) / SS304 Disc / SS316 Disc / Cast Iron Disc / Ductile Iron Disc / Mild Steel Disc / Renewable Disc / SG Iron Disc / S.S 202 Disc / Resilient Disc (Nitrile Rubber) / Spring Leaded Disc / Swing Type Disc
Operator:Hand Wheel Operated
Body (MOC):Forged Brass Body / Forged Carbon Steel Body / Bronze / Gun Metal Body/ Bronze (Gun Metal) / Cast Iron / Cast Carbon Steel / SG Iron / Stainless Steel (SS202, SS304, SS316) / Cast Stainless Steel / Forged Brass / PP / HDPE / Forged Stainless Steel (F304, F316)
Pressure Rating:Class-125 / Class-150 / Class-300 / Class-600 / Class-800 / Class-1500 / Class-900/ Class-2500 / PN-6 / PN-10 / PN-16 / PN-20 / PN-25 / PN-30 / PN-40 / PN-100 / Class-1 / Class-2 / 20 kgf/cm2 (300 LBS) / 40 kgf/cm2 (600 LBS) / 40 kg/cm2 (600 LBS)
Type:Horizontal Type / Vertical Type / Swing Type Non Return Valve / Feed Check Valve Type / Angle Type/ Lift Check Valve Wafer Type / Dual Plate Type / Disc Check Valve Type / Wafer Type / Ball Type / Piston Lift Up Type / Flap Type / O.S And Yoke Type / Y Type
ISI / Non-ISI:ISI & Non-ISI Both Available
IS Standard:IS:778/1980 / IS:5312 / IS:5312
IBR / Non-IBR:IBR & Non-IBR Both Available
End Connection:Socket Weld End / Flanged End / Screwed End / Wafer End / Solid Lug Type Butt Weld End / Female Ends / Flanged End
End Connection Type:“Suitable for Insertion Between Flanges as per BS 10 Table E / “Welded On Flanges as Per ASME B 16.5:CI 600 R.F. (Drilled) Serrated ” / Suitable for Insertion Between Flanges as per BS : 10 Table ‘E’ (Drilled) / Wafer type suitable for clamping between flanges as per ASME B 16.5 Class-150 / “Wafer Type Suitable For Clamping between flangs as Per ASME/ANSI B16.1 Cl-125” / Wafer Type Suitable for Clamping between flanges as per ASME B 16.5 CL – 300
Temp:100 C degree / 250 C degree
Bore Type:Reduced Bore / Full Bore / Standard Bore
Design:1 PC Design / 2 PC Design / Wafer type / Flanged type

Related Products

Mobrey ValveMobrey Valve

Mobrey Valve

Mobrey Valve: Mobrey is the name used for the Automatic water level controller, it comes under the category of mountings and fittings of Steam Boiler Assembly. As the name suggests, it is used for maintaining the water level in the Boiler shell. It is mostly used in smoke tube steam boilers not in water tube boilers, as the shell diameter of the former is greater than that of latter irrespective of their running capacities and working pressures.

View product
Product Enquiry
Steam TrapSteam Trap

Steam Trap: Efficient Condensate Management Solution

Steam Trap: A steam trap is a device used to discharge condensates and non-condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically.

View product
Product Enquiry
Strainer ValveStrainer Valve

Strainer Valve: Ensure Clean and Efficient Flow

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Strainer: Y-Strainers are devices for mechanically removing unwanted solids from liquid, gas or steam lines by means of a perforated or wire mesh straining element. They are used in pipelines to protect pumps, meters, control valves, steam traps, regulators and other process equipment.

View product
Product Enquiry
Bonnet Wheel ValveBonnet Wheel Valve

Bonnet Wheel Valve

Bonnet Wheel Valve: The cover for the opening sin the body is the bonnet, and it is the second most important boundary of a pressure valve. Like valve bodies, bonnets are in many designs and models available. A bonnet acts as a cover on the valve body, is cast or forged of the same material as the body. It is commonly connected to the body by a threaded, bolted, or welded joint. During manufacture of the valve, the internal components, such as stem, disk etc., are put into the body and then the bonnet is attached to hold all parts together inside.

View product
Product Enquiry
Gauge CockGauge Cock

Gauge Cock

A gauge cock is a type of valve used primarily in conjunction with water level gauges to control the flow of fluids into the gauge. This valve allows operators to isolate the gauge from the vessel or pipeline system for maintenance or replacement without disrupting system operations. Gauge cocks are crucial in applications like boiler operations, where precise water level monitoring is essential for safety and efficiency. They typically feature a simple quarter-turn operation and provide a reliable means of sealing off the gauge from high pressures and temperatures.

View product
Product Enquiry
Butterfly Valves ManufacturerButterfly Valves Manufacturers

Butterfly Valve: Efficient Flow Control Solution

Butterfly valves are very similar to ball valves they also work on the phenomenon of quarter-turn rotational movement which means by moving 90 degrees it could be either turned on to fully operated or turned off to restrict the flow of fluid. This is used to transfer, regulate or stop the movement of a fluid. They are used widely in the industries such as food processing, water supply industries, water pumping, etc. they are used wherein there is a need for a broad range of flow isolation Is required. “They belong from the quarter-turn family” and they usually have large pipe diameter.

View product
Product Enquiry
Sluice Valve ManufacturerSluice Valve Manufacturer

Sluice Valve: Reliable Flow Control for Your System

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Sluice Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

View product
Product Enquiry
Relief ValvePressure Relief Valve

Relief Valve: Trusted Solution for Pressure Management

Relief Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

View product
Product Enquiry
Needle ValveNeedle Valve

Needle Valve

Needle Valve: A needle valve is a type of valve with a small port and a threaded, needle-shaped plunger. It allows precise regulation of flow, although it is generally only capable of relatively low flow rates.

View product
Product Enquiry
Fusible Plug ManufacturersFusible Plug Manufacturers

Fusible Plug: Essential Safety Component for Your System

Fusible Plug: A fusible plug operates as a safety valve when dangerous temperatures, rather than dangerous pressures, are reached in a closed vessel. In steam engines the fusible plug is screwed into the crown sheet (the top plate) of the firebox, typically extending about an inch (25mm) into the water space above it.

View product
Product Enquiry
SprinklerSprinkler

Sprinkler Valve: Optimal Water Flow Control Solution

Sprinkler: A sprinkler is a device used to spray water. Sprinklers are used to water plants or grass, or to put out fires in buildings. a device perforated with small holes that is attached to a garden hose or watering can and used to spray plants, lawns, etc.

View product
Product Enquiry
Gate Valve Manufacturers in IndiaGate Valve Manufacturers in India

Gate Valve: Precise Control for Flow Regulation

Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.

Gate Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.

View product
Product Enquiry
Pressure Reducing Valve ManufacturersPressure Reducing Valve

Pressure Relief Valve: Reliable Pressure Control Solution

Pressure Reducing Valve: A relief valve or pressure relief valve is a type of safety valve used to control or limit the pressure in a system; pressure might otherwise build up and create a process upset, instrument or equipment failure, or fire.

View product
Product Enquiry
Breather Valve

Breather Valve

A breather valve, also known as a pressure-vacuum relief valve, is designed to manage the pressure inside storage tanks that hold volatile liquids or bulk materials. These valves open at a preset pressure or vacuum level to equalize pressure, preventing the tank from over-pressurizing or undergoing vacuum conditions that could lead to structural damage. They are critical for safety in industries like oil and gas, chemicals, and pharmaceuticals, where proper pressure balance is essential for operational safety and environmental protection.

View product
Product Enquiry
Gas Plug ValveGas Valve

Gas Valve

A gas valve is a critical component in managing the flow and pressure of gas in heating systems, appliances, and industrial processes. This type of valve is specifically designed to ensure safe and efficient operation when handling combustible gases such as natural gas or propane. Gas valves are equipped with safety mechanisms that shut off the gas flow automatically if the pilot light goes out or if a leak is detected, preventing potential hazards. They are commonly found in residential furnaces, gas-powered water heaters, and commercial gas stoves, playing a pivotal role in both safety and functionality.

View product
Product Enquiry
Fire Hydrant Landing ValveFire Hydrant Landing Valve

Fire Hydrant Landing Valve: Reliable Fire Safety Solution

A Fire Hydrant Landing Valve, also known as a landing valve, is a crucial component in firefighting water supply systems. It provides an accessible means for the fire service to tap into the municipal water supply during emergencies. These valves are typically mounted on risers within buildings or on external fire hydrants, featuring a connection point for fire hoses. They are designed to withstand high pressures and allow for rapid deployment and control of water flow to combat fires effectively, ensuring quick and efficient response in critical situations.

View product
Product Enquiry
Sight Glass ValveSight Glass Valve

Sight Glass Valve

Sight Glass Valve: A sight glass is a transparent tube through which the operator of a tank or boiler can observe the level of liquid contained within. Simple sight glasses may be just a plastic or glass tube connected to the bottom of the tank at one end and the top of the tank at the other.

View product
Product Enquiry
Reflux Valve ManufacturerReflux Valve

Reflux Valve

Reflux Valve: A check valve, clack valve, non-return valve, reflux valve, retention valve or one-way valve is a valve that normally allows fluid to flow through it in only one direction. Check valves are two-port valves, meaning they have two openings in the body, one for fluid to enter and the other for fluid to leave.

Reflux Valve Dealer and Distributor: Induskart is leading supplier and distributors in all types of Reflux Valve, Available brands are Leader, L&T, Audco, Kirloskar, Kartar, Zoloto, Sant, Sir etc. These valves are available in various types of moc like Bronze, Gun Metal, Forged Brass, Cast Steel, Cast Iron, Stainless Steel etc.

View product
Product Enquiry
Scroll To Top
Close
Close
Close

My Cart

Shopping cart is empty!

Continue Shopping