Industrial Belts
Industrial Belts: Industrial belts are designed to transmit power between shafts and capable of moving at very high shaft speed. Industry has different use of industrial belts according to theirs need. These belts are round belts, v belts, flat belts, timing belt and PVC conveyor belt etc.
Filler Wires
Filler Wires: Welding is a fabrication or sculptural process that joins materials, usually metals or thermoplastics, by using high heat to melt the parts together and allowing them to cool causing fusion.
Welding Cable
Welding cable: Welding cable is designed for use in electric arc-welding machines to power an electrode, a specially designed metal rod, that conducts a charge. The charge carried by the electrode is needed to produce an electric arc, the heat source, between the electrode and the metals being welded.
Hand Gloves
Butterfly Valve: Butterfly Valve has a similar operation like Ball Valve. It is used to block the flow of Media (like Water, Chemical etc.). Generally, user preferred butterfly valve instead of ball valve because it is economical. It is available in Minimum size of 40mm. Butterfly valve has a simple structure which is contain Body, Seal, Stem, Rubber seat (Nitrile, EPDM, Viton), Disc (Sg Iron, SS) & Lever. It is easy to use by Lever & Gear. It will also operate by Actuator. Basically, up to 150mm butterfly valve is operated by Hand Lever & Above 150mm butterfly valve is Gear Operated.
There is various type of Butterfly Valves Like: –
According to Flow of circuit
- Wafer Type Butterfly Valve
- Semi Lug Type Butterfly valve.
- Lug Type Butterfly valve.
- Double Flanged Type Butterfly valve.
- Motorized Butterfly valve.
Butterfly valve is also known as quarter-turn valves in the family of Valves. Butterfly valve has a different type of pressure rating & Different usage which depends on MOC of rubber & Disc. Butterfly valve available in SG Iron (Cast Iron), Cast Steel, SS304, SS316, Aluminum body.
Lockout Tagging
Lockout Tagging: Lock Out, Tag Out, Lock Out, Tag Out, Try Out or lock and tag is a safety procedure used in industry and research settings to ensure that dangerous machines are properly shut off and not able to be started up again prior to the completion of maintenance or repair.
Drill Machines
Drill Machines: A drill is a tool primarily used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver, depending on application, secured by a chuck. Some powered drills also include a hammer function.
Drills vary widely in speed, power, and size. They are characteristically corded electrically driven devices, with hand operated types dramatically decreasing in popularity and cordless battery powered ones proliferating. Drills are commonly used in woodworking, metalworking, machine tool fabrication, construction and utility projects. Specially designed versions are made for medicine, space, and miniature applications.
Allen Keys
Allen Keys: A hex key, Allen wrench or Allen key, is a simple tool used to drive bolts and screws with hexagonal sockets in their heads. The tool is usually formed of a single piece of hexagonal rod of hard steel, with blunt ends that are meant to fit snugly into the screw’s socket, bent in an “L” shape with unequal arms.
Hydraulic & Manual Jacks
Hydraulic & Manual Jacks: Working Principle of HYDRAULIC JACK or HYDRAULIC PRESS. The hydraulic jack is a device used for lifting heavy loads by the application of much smaller force. It is based on Pascal’s law, which states that intensity of pressure is transmitted equally in all directions through a mass of fluid at rest.
Tools Kits
Tools Kits: Tools and equipment are terms that are often used interchangeably without knowing the actual difference between tools and equipment, but in fact, they have different definitions. Tools and equipment are not only two words that are often used in day to day life, but also two utensils that are often used every day as well.
Tool Set has the tools you need to tackle a variety of tasks around the house. Whether you’re doing basic repairs, hanging pictures or cutting through boxes, this tool kit will equip you with the high-quality essentials required to complete many DIY projects.
Raised Face
Raised Face Flange: The Raised Face flange is the most common type used in process plant applications, and is easily to identify. It is referred to as a raised face because the gasket surfaces are raised above the bolting circle face
Plastic Pipe
Plastic Pipe: Plastic pipe is a tubular section, or hollow cylinder, made of plastic. It is usually, but not necessarily, of circular cross-section, used mainly to convey substances which can flow liquids and gases (fluids), slurries, powders and masses of small solids.
Elbows
Elbows: An elbow is installed between two lengths of pipe (or tubing) to allow a change of direction, usually a 90° or 45° angle; 22.5° elbows are also available. The ends may be machined for butt welding, threaded (usually female), or socketed. When the ends differ in size, it is known as a reducing (or reducer) elbow.
Frame Fixing Anchors
Frame Fixing Anchors: Plastic frame fixings are the ideal solution for the fixing of facade constructions, roof substructures, heavy wall cabinets, squared timbers, cable trays, gates and doors. With the long plug shaft, these can be directly secured in the building substrate through the attachment part.
Nylon Anchor
Nylon Anchor: Nylon Anchors are pre-assembled through fixing, a light duty nail expanding for solid masonry and hollow wall constructions. The design of the expansion nail used in the Nylon Anchor is such that it can be removed if need be.
Chemical Anchor
Chemical Anchors IndusKart
Anchoring is a usual process in industries. Induskart presents a range of Anchors and Fastener solutions for Industries at the same place and with sufficient information on each of them. With this goal, Induskart brings you Anfagro Brand, A wide range of Chemical Anchor to choose from.
What is Chemical Anchoring?
Chemical anchoring is a process in which resin is injected into a hole before the insertion of the stud. With the insertion of resin, all the irregularities and flaws of the hole are sealed airtight with approximately 100% adhesion. Chemical anchors provide superior load capacity as there is no embedment limit with chemical anchors. One can embed any length of the rod in the hole to increase load capacity. The option of selecting a larger diameter rod while embedment is also possible with chemical anchoring. This is the reason Chemical anchors have more audience than other forms of anchors
Rebar Chemical
Rebar Chemical: Rebaring technique in reinforced concrete construction is a method for proper fabrication and placement of reinforcement bars as per the design and drawings for RCC works. The reinforcement bars are mainly patterned over its surface to facilitate proper bonding with the concrete.
Ball Valve
Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.
Ball Valve: A ball valve is a form of quarter-turn valve which uses a hollow, perforated and pivoting ball to control flow through it. It is open when the ball’s hole is in line with the flow and closed when it is pivoted 90-degrees by the valve handle. Ball Valve is a Shutoff type valve which is used to control the flow of Fluid (Liquid/Gas). The valve basically has ball inside it which is used to control the flow, the ball is attached with an external lever which opens/closes the passage for fluid to pass through the valve. Usually ball valves are used for sizes below 100MM, above that gate valves are used instead of ball valve. Ball valves comes in various type and in various MOC
Gate Valve
Valve: Valves are for starting or stopping flow, regulating or throttling flow, preventing back flow or relieving and regulating pressure in fluid or gaseous handling applications. Common valve types include: Ball, Butterfly, Check, Diaphragm, Gate, Globe, Knife Gate, Parallel Slide, Pinch, Piston, Plug, Sluice, etc.
Gate Valve: A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped.
Plug Valve
Plug Valve: Plug valves are valves with cylindrical or conically tapered “plugs” which can be rotated inside the valve body to control flow through the valve. The plugs in plug valves have one or more hollow passageways going sideways through the plug, so that fluid can flow through the plug when the valve is open.
Sight Glass Valve
Sight Glass Valve: A sight glass is a transparent tube through which the operator of a tank or boiler can observe the level of liquid contained within. Simple sight glasses may be just a plastic or glass tube connected to the bottom of the tank at one end and the top of the tank at the other.
